| |
 |
|
Fliton proudly unveils it's second 60 class offering. This sleek aircraft is designed for 3D Acro performance. The removable main wings are joined by using a durable carbon wing tube, making transportation easy! Robust fiberglass landing gears also provided incase of an "extra" soft landing. True hybrid construction also makes electric/gas conversion a breeze. In short, the Edge 540 Freestyle offers easy assembly, outperforms any airplane in it's class and will really take your flying to the next level.
|
|
|
 |
Step-by-Step Manual, Custom Decals, |
|
Fiberglass Painted Cowl, Removable Top Hatch |
|
Airfoiled Surfaces including Elevator and Rudder |
|
FRP Landing Gear, FRP Wheel Pants, |
|
Carbon Wing Tube, Two Piece Main Wing, |
|
Taxiing Tail Wheel, Fuel Tank, Engine Mount, |
|
Dual Elevator Capable & Complete Hardware |
|
 |
 |
 |
 |
 |
| Wingspan : |
1,480 mm |
Length : |
1,404 mm |
Flying
Weight : |
2,600g |
| |
58.26 inches |
|
55.27 inches |
|
91.71 oz |
![]() Main
Wing Area : 37.26sq dm2 |
|
|
|
|
 |
|
|
| Low Rate |
 Ailerons : 0.66 inch
/ 17 mm Up/Down |
| Elevator : 0.59 inch
/ 15 mm Up/Down |
| Rudder : 0.98 inch
/ 25 mm Up/Down |
|
|
|
|
|
| High Rate |
| Ailerons : 2.16 inch
/ 55 mm Up/Down |
| Elevator : 1.77 inch
/ 45 mm Up/Down |
| Rudder : 1.37 inch
/ 35 mm Up/Down |
|
|
|
|
 CG
range approx 20mm to the Engine
from the fixed pipe center. |
| The wheel holes may need to be enlarged to fit the provided screws. |
| Review
: Visit our News section for the Edge Ezone Review |
| Edge
Electric Conversion by Greg Milosevich
(Fliton Beta Tester) |
|
|
| View
Conversion Information: [
Click Here ] PDF Format (1.23mb) |
| Free
Acrobat PDF Reader: [
Click Here ] (27mb) |
 |
 |
| |
 |
| Below are tested recommendations. Individual performance results may vary, use at customer's own discretion. |
| |
Moderate to Advanced Flying Setup
|
|
Servos: (4) Hitec HS-5245MG
(1) Hitec HS-6985HB Pull-Pull Rudder Servo (optional)
|
Motor: Hacker A50:12S or Hacker Inrunner C50:10L (6.7:1)
E-Flite Power 60BL
AXI 4130/16
|
| |
Battery: TP 4200mAh (3s2p) 11.1v LiPo |
| |
Propeller: 17 x 10E (outrunner) or 16 x 10 (inrunner) |
| |
Speed Controller: Jeti Opto 77 or 70~80A ESC |
| |
Outrunner Mounting Spacers: (8)1" Nylon + (4)1/4" Nylon |
| |
UBEC: 6V Ultimate BEC |
| |
|
