Fliton proudly unveils the lightweight   
     Extra 330S Mini, a full 3D & aerobatic ARF
     offering superior quality build and excellent
     maneuverability. Enjoy this hand crafted,
     tightly sealed masterpiece, which has been

     highly acclaimed by today's top pilots. A
     detachable top canopy and hatch combination allows for easy access on and off the field. Now
     
     comes with three motor mounts! You will also be blown away by this planes "point and go"
     performance.  The lightweight and masterfully engineered airframe slows down to a crawl and
     practically lands itself. The Fliton Extra 330s Mini offers excellent performance, a straightforward
     build right out of the box and the custom color combination screams eye candy!
  
     
     
    Step-by-Step Manual. Custom Decals.
    Fiber Glass Landing Gear. FRP Wheel Pants.
    Duralumin Linkage Horn. Main Wing. Tail Wings.
    Clear Canopy, Pre-painted Cowl
    Other Hardware and more...
Custom Decals
  
  Wingspan :  980 mm   Length :  981 mm   Flying Weight :  580 ~ 600g
  38.58 inches   38.62 inches   20.45 oz
          Airplane only :  282g
          9.94 oz
          Wing Loading :  11.3 oz
          / sq. ft
  
 
  Radio: 4 Channel Radio
  E.S.C: 25A Electric Speed Controller
  Servo : (4) Hitec HS-55 or 65HB
  Battery: Fliton F1200mAh Li-Po
  (max 20c, 3S1P 11.1 Volt)
  Motor : Hacker A20-20L
  
    Rates below are provided only as a guide. Your rates may vary based on desired performance.


Travel Low Rates Expo Low Rates
 Ailerons : 3/8"  Ailerons : 50%
 Elevator : 1/2"  Elevator : 40%
 Rudder : 1"  Rudder : 40%
 
Travel High Rates Expo High Rates
 Ailerons : 5/8"  Ailerons : 20%
 Elevator : 1 1/2"  Elevator : 20%
 Rudder : 1 1/2"  Rudder : 15%
 
  
 
  Complimentary carbon rod provided for structural bracing or pushrod application.

  Trial fit the provided motor mount(s) first, before adhering with glue. (Thrust: down/right)

  Doubling landing gear plate with provided carbon rod or light ply is recommended
    but not mandatory.

  Reinforcing the interior portion of the fuselage (where the main wings join) with CA before
    fixing the wings is recommended but not mandatory. Use caution and do not oversoak, as
    it may block the provided slots.

  Recommended prop size: 10 x 4.7 or 10 x 5.5 APC

  Overpowered high G maneuvers not recommended without proper structural modifications.

 Arrow View our Build Tip Article (w/ pictures) that addresses certain modifications we recommend.
     Download: Click Here (PDF)    Click Here (Word)


 
 
Click Here to Buy  Dealers